Model

MDC-i6261VTD-66H

Image Sensor

SONY 1/3”CMOS

Video Resolution

Max 1280x720

Lens Mount

Filter Changeable Vari-Focal 3.5~16.0mm DC Auto Iris Lens

Min. Illumination

Min Color 1.2 Lux / BW 0.1 Lux

Electronic Shutter

1/2,000s~1/30s

Video Encoding

MJPEG/H.264 Dual Streaming

Compression

H.264 & MJPEG : 6 levels (low compression / highest / high / normal / low / lowest

Resolution

160(H) X 96(V), 320(H) X 176(V), 640(H) X 352(V), 1280(H) X 720(V)

Data Transmission Speed

Max 30 frames per second through primary streaming / Max 10 frames per second through secondary streaming with Full Duplex Audio Transmission

Audio Encoding

APCM 4bit IMA Sampling Rates 8KHz Audio

Audio Channels

1ch audio-in & 1ch audio-out

UART Support

Console, By-pass command to control UART device
X10 device command to control device over power line, Modem Support
( ISDN, PSTN and GSM )

Bandwidth Management

Frame rate control / Bandwidth control / CBR / VBR

Alarm Management(for 1 analog channels)

[ Trigger Condition ]
Video loss / Video recovered / Motion detection (144 area) /
1ch alarm inputs / Boot finished / Serial input / Schedule
[ Alarm Service ]
Image holding service (Max 15.5MByte pre-post alarm buffer)
Image upload service through E-mail / FTP (support pre & post)
Notification service through TCP / UDP / HTTP / 1 alarm outputs

Security

Channel based user password protection for live-cast, PTZ, alarm output
and audio

System Integration Features

[Protocol]
HTTP, RTP/RTSP, Multicast, TCP/IP, ARP, ICMP, Telnet, Ftp, PPPoE, SMTP,
DHCP, NTP, uPNP, and etc.
[SDK]
Open HTTP API / ActiveX for live cast with audio & PTZ
[Service]
Image upload / notification service / special service for POS integration

Installation and Maintenance

Configuration: installation wizard, HTTP, telnet and console.
Upgrade firmware: HTTP, telnet & ftp

Misc.

Transmit serial input data with video
Support NTP server
Quick Time media player compatible

System Hardware

32bit RISC CPU / Embedded Linux / 256MByte SDRAM / 16MByte Flash

External Interface

10/100-Base-T Ethernet (auto-sensing)
1 photo-coupled or 1 digital inputs (NC/NO selectable), 1 relay outputs
1 audio input / 1 audio output
2 serial ports (COM: RS-232, AUX: RS-232)

Power Over Ethernet

IEEE 802.3af (optional module)

Operating Temperature

32~122 F (0~50° C)

Operating Humidity

Humidity : 20~80% RH

Approvals

CE/FCC

Power Voltage

Dual Power-DC12V/AC24V